Biosound Esaote EC123 Micro-Convex Array Ultrasound Transducer Probe
product detail
Other Biosound probes we can offer:
| Brand | Model | Compatible System |
| Biosound Esaote | CA123 | DU3/4/MyLab series |
| Biosound Esaote | CA421 | DU3/4/Caris Plus/MyLab series |
| Biosound Esaote | CA431 | MyLab5/20/25/25Gold/30Gold/40/50/50XV/70XV |
| Biosound Esaote | CA541 | MyLab 5/MyLab 20/MyLab 25/MyLab 25Gold/MyLab 30Gold/MyLab 40/MyLab 50/MyLab 50XV |
| Biosound Esaote | CA621 | DU3/4/Caris Plus/My Lab15/20/25/30 |
| Biosound Esaote | EC1123 | MyLab 5/20/25 Gold/40/50 |
| Biosound Esaote | EC123 | DU3/DU4/Caris Plus/My Lab15/20/25/30 |
| Biosound Esaote | LA424 | Mylab series |
| Biosound Esaote | LA522E | Technos MP/ MPX/ Partner/ Megas CVX/ GPX/ Caris Plus/ MyLab15/20/25/30/50/ 70 |
| Biosound Esaote | LA523 | Technos/ Megas/ Caris/ Caris Plus/ MyLab 50/ Mylab 70 |
| Biosound Esaote | PA220E | Megas/ Caris Plus/ Technos |
| Biosound Esaote | PA230E | Mylab5/23/25/Megas/Caris Plus |
Warnings and cautions of ultrasonic probe
★The ultrasonic probe is a valuable device. It must be careful in the process of use. Avoid dropping, impact, or abrasion to transducers.
★When installing or removing the probe, first switch off the power and then operate it carefully.
★Avoid rapid and extreme temperature changes, as well as lengthy exposure to direct sunlight or a strong ultraviolet light source.
★Do not use sharp objects to penetrate the acoustic lens.Once the acoustic lens is damaged, the coupling gel is easy to enter the interior of the probe and damage the piezoelectric element.
★Do not soak transducer in any liquid above the recommended level as stated in the user manual for your system, please operate according to the manufacturer's instructions, otherwise it will lead to circuit failure or even burn out.
★Do not disinfect at high temperature, because the probe is equipped with piezoelectric ceramics, high temperature will weaken the effect.
★Before use, carefully check whether the housing and cable are damaged, so as to prevent the probe from high voltage injury.
★After the probe is used, the residual coupling gel on the probe must be wiped clean to prevent rats or other animals from gnawing the lens.