Philips Ultrasonic Technology Case
Fault Symptom:
The equipment can power on normally, there are bright channels in the image, and it also shows Error 027.Fault pictures and videos are as follows:
Fault Analysis :
Repair Process: As shown in the video above, there are bright channels in the image, and it also shows Error 027. This may be caused by an ACQ problem. Conducted a self-test on the equipment to identify the issue. The results of the self-test are shown in the image below.
Based on the equipment's self-test results, it indicated an ACQ fault. Subsequently, the ACQ was replaced for further investigation, and the fault was successfully resolved.
Repair Outcome:
The ACQ replacement resulted in the resolution of the fault.
Fault symptom:
Philips HD11 reports an error upon startup.
Fault Analysis:
Philips HD11 reports an error upon startup. Preliminary assessment indicates a power supply or SP board malfunction. After replacing the SP board and finding the fault persists, the power supply is eventually replaced, resolving the issue.
Maintenance Result:
Philips HD11 reports an error upon startup.
Fault Phenomenon:
PHILIPS 7C reports error 200 during startup, with the following symptoms:
Fault Analysis:
As shown in the image, the machine reports error 200 after startup, rendering it unable to function normally. Make a hardware test for the machine.
Hardware test results pointed to ACQ.
After replacing the ACQ, the system started without reporting errors.
And hardware results are normal after changing ACQ.
Fault Phenomenon:
After replacing the ACQ, the machine is operating normally.
